Used Machine Tool Quote | Machine Tools 24/7

Machine Tools 24-7

Phone 352-799-8398 - Fax 352-799-0315

At Machine Tools 24-7 we never stop working to serve your machine tool needs

Below are the specs we have on file for this machine. Please contact Machine Tools 24-7 if you have any questions.

Click Machine Title Below to View Photos
Mitsui-Seiki-JIDIC-H6C_ID-13971

Machine ID	Year	Manufacturer	Model	Control
13971	1993	Mitsui-Seiki	JIDIC-H6C	Fanuc 15M

	Description	Spec Values
Pallet:	Pallet Size (2 Pallets)	31.5" x 31.5"
	Pallet Indexing / Table Load	360,000° / 1,100 Lbs
Travels:	X-Axis Travel	51.2"
	Y-Axis Travel	39.4"
	Z-Axis Travel	39.4"
	B-Axis Travel	360,000°
Spindle:	Spindle Speeds Minimum - Maximum	20 - 3,150 RPM
	Spindle Taper	50 Taper
	Main Motor (30 min / continuous)	25 / 20 HP
	Spindle Center to Table Top	3.9" - 39.4"
Tool Changer:	Tool Changer Positions	120 ATC
	Tool Change Time (Tool-to-Tool / Chip-to-Chip)	1.7 / 4.5 Sec.
Rapids:	Rapid Traverse (X, Y & Z )	742 IPM
	Feed Rate	0.01 - 393 IPM
Dimensions:	Floor Space (L x W x H)	275" x 216" x 156"
	Weight (approx.)	70,500 Lbs

	Equipped With
Additional Info.:	Floodd Coolant
	Remote Jog Handle
	Spindle Chiller
	Chip Conveyor
	Chip Auger
	Accuracy of a Jig Mill
	Tool Touch Probe
	Color CRT
	Machine Can Handle 39.4" Pallets
	Coolant Through Spindle
	Two (2) Speed Geared Head

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes.

We Sell Used Mazak, Mori Seiki, Okuma, Kitamura, Toyoda, Fadal, Haas, Cincinnati, Starr Swiss, Citizen Swiss, Nakamura, Daewoo, Doosan, Makino, Matsuura, DMG and other machine tools; these Names or Marks are used solely to identify the make and model of used CNC machine tool and does not imply or indicate any affiliation or relation with manufacturers or distributors of said Name(s) or Mark(s).