Used Doosan Lathe and Machining Centers, HM, DHM, DHP, Puma, MX, TT, DMV, MV, Ace, Proturn, DBC, CNC  - Machine Tools 24/7

All Used Doosan Machine Tools Available - Click Here To Return To Machine Tools 24/7 Site -> www.machinetools247.com - Click Here to Request Quote

Used Machine Tool Quick Links Below - Full Machine List Click Here

Used Haas CNC    Used Mazak    Used Doosan    Used Daewoo    Used Okuma    Used Mori-Seiki    Used Fadal    Used Makino

Lathes    Vertical Machining Centers    Horizontal Machining Centers      Horizontal Boring Mills    Vertical Boring Mills

Click On InvID Number To View More Machine Info
Machine IDYearManufacturerModelControlDescriptionList
Doosan-DBC-110S_ID-156362012DoosanDBC-110SFanuc 31iABORING MILLS, HORIZ, TABLE TYPE CNC W-ATC4.33" Spindle, 35 HP, 3,000 RPM, 50 Taper, 78.74" x 59.05" x 47.24" x 21.6" Travels, 40 ATC, Full 4th, 55.1" x 63" Table, PCMCIA Card Slot, Tool Length Compensation, High Pressure Coolant Through Spindle, High Torqu Spindle, Glass Scale X, Y & Z
Doosan-DBC-130 II_ID-163292014DoosanDBC-130 IIFanuc 32iABORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 
Doosan-VT-450_ID-164142014DoosanVT-450Fanuc OiTBBORING MILLS, VERTICAL and VTL, CNC and NC 
Doosan Puma-V450 TM_ID-177212005DoosanPuma-V450 TMFanuc 18iTBBORING MILLS, VERTICAL and VTL, CNC W-MILLING15" Table, 22.83" Swing, 19.6 Under Rail, 2,500 RPM, 30 HP, 12 Stattion Turret, Chip Conveyor
Doosan-Puma V-550M_ID-167232011DoosanPuma V-550MFanuc 32iABORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC18" Table, 31.5" Swing, 31 Under Rail, 2,000 RPM, 50 HP, 12 Stattion Turret, Chip Conveyor
Doosan-Puma V-550_ID-162272002DoosanPuma V-550Fanuc 18iTBLATHES, CNC, 2-AXIS, CHUCKER 
Doosan-Puma-300 C_ID-166282015DoosanPuma-300 CFanuc i SeriesLATHES, CNC, 2-AXIS, UNIVERSALSwing 23.2", Swing Over Cross Slide 17.7", Maximum Turning Diameter 15.7", Length 26.6", 4.05" Bar Cap., 2,800 RPM, 35 HP, Programmable Tailstock, Chip Conveyor, Box Ways, More..
Doosan-Puma-400 B_ID-165602005DoosanPuma-400 BFanuc 21iTBLATHES, CNC, 2-AXIS, UNIVERSALSwing 30.3", Swing Over Cross Slide 23.2", Maximum Turning Diameter 22.4", Length 41.1", 4.6" Bar Cap., 2,000 RPM, 50 HP, 12 Sta. Turret, Tailstock, 18" 3-Jaw Chuck, Chip Conveyor, Programmable Tailstock, Tool Setter, Two (2) Speed Geared Head, Very Low
Doosan-Puma-400 B_ID-165782013DoosanPuma-400 BDoosan Fanuc iLATHES, CNC, 2-AXIS, UNIVERSALSwing 30.3", Swing Over Cross Slide 23.2", Maximum Turning Diameter 22.4", Length 41.1", 4.6" Bar Cap., 1,500 RPM, 50 HP, 12 Sta. Turret, Tailstock, 18" 3-Jaw Chuck, Chip Conveyor, Tailstock, Tool Setter, Two (2) Speed Geared Head, Very Low Hours....
Doosan-Lynx-220 LYC_ID-166962014DoosanLynx-220 LYCFanuc OiTDLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 
Doosan-Lynx-220 LYC_ID-165742017DoosanLynx-220 LYCFanuc i SeriesLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING23.6" Swing, 11.8" Turn Dia., 20.1" Turn Length, 4,500 RPM, 20 HP, 12 Stations, 8" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, More.
Doosan-Puma-2000 SY_ID-165802007DoosanPuma-2000 SYFanuc 31iLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING23.622" Swing, 21.6535" SOC, 5,000 RPM, 2.625" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Chuck on Main Collet Chuck on Sub, Parts Catcher, Bar Feed, Chip Conveyor, More
Doosan-Puma-2600 M_ID-167822011DoosanPuma-2600 MFanuc OiTDLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING30.7" Swing, 24.8" Turn Dia. Chucking, 29.9", Shaft 14.8", 29.9" Turn Length, 4,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor, More.
Doosan-Puma-400 MB_ID-162072001DoosanPuma-400 MBFanuc 18iTLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 
Doosan-Puma-480 XLM_ID-161242015DoosanPuma-480 XLMFanuc OiTLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 
Doosan-Puma-600 LM_ID-156512013DoosanPuma-600 LMFanuc 31iTLATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING21" 3-Jaw Hydraulic Chuck, 18.5" x 127.36" Travels, 4.6" Bar Cap. 60 HP, Tool Presetter, Fully Programmable Tailstock, Chip Conveyor, Hydraulic Steady Rest, More..
Doosan-Puma-2600 SY_ID-165482018DoosanPuma-2600 SYFanuc 31iTDLATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 
Doosan-Puma-TT-1500 SY_ID-166752006DoosanPuma-TT-1500 SYFanuc 18iTBLATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 
Doosan-Puma-TT-1800 SY_ID-167912018DoosanPuma-TT-1800 SYFanuc 31iBLATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 
Doosan-MX-2000 ST_ID-166122006DoosanMX-2000 STFanuc 18iTBLATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE29.5" Swing, 23.6" SOC, 21.65" Turning Dia., 40" Turning Length, 5,000 RPM, 2.625" Bar Cap., 25 HP, Chip Conveyor, 8" 3-Jaw Hydraulic Chucks, Chip Conveyor, High Pressure Coolant, More
Doosan-DHP-4000_ID-166852006DoosanDHP-4000Fanuc 18iMBMACHINING CENTERS, HORIZONTAL CNC15.75" x 15.75" Pallets, 1°, 23.6" x 22" x 23.6" Travels, 12,000 RPM, 40 Taper, 30 HP, 60 ATC, Coolant Through Spindle, CoolJet Coolant Filtration and Pump, More..
Doosan-DHP-5000_ID-166862010DoosanDHP-5000Fanuc 31iMAMACHINING CENTERS, HORIZONTAL CNC19.7" x 19.7" Pallets, 1°, 33.4" x 27.6" x 29.5" Travels, 12,000 RPM, 40 Taper, 30 HP, 60 ATC, Coolant Through Spindle, More..
Doosan-HP-4000_ID-167522010DoosanHP-4000Fanuc 31iMAMACHINING CENTERS, HORIZONTAL CNC15.7" x 15.7" Pallets, 1°, 23.62" x 22.05" x 23.6" Travels, 14,000 RPM, 40 Taper, 35 HP, 60 ATC, Coolant Through Spindle, More..
Doosan-HP-5100_ID-159412010DoosanHP-5100Fanuc 31iBMACHINING CENTERS, HORIZONTAL CNC19.7" x 19.7" Pallets, 33.5" x 27.6" x 29.5", 14,000 RPM, 40 Taper, 30 HP, 40 ATC, Chip Conveyorr, RS-232 Port, Rigid Tapping, Spindle Chiller, Coolant Through Spindle, More....
Doosan-NHM-5000_ID-161712013DoosanNHM-5000Fanuc 31iBMACHINING CENTERS, HORIZONTAL CNC 
Doosan-NHM-6300_ID-158682014DoosanNHM-6300Fanuc 31iBMACHINING CENTERS, HORIZONTAL CNC 
Doosan-DNM-400_ID-163342010DoosanDNM-400Fanuc Oi-MCMACHINING CENTERS, VERTICAL, CNC36.2" x 17.1" Table, 30" x 17.1" x 20.1" Travels, 12,000 RPM, 40 Taper, 20 HP, 30 ATC, Coolant Through Spindle, Rigid Tapping, Remote Jog Handle, More..
Doosan-DNM-500_ID-163332013DoosanDNM-500Fanuc Oi-MDMACHINING CENTERS, VERTICAL, CNC47.2" x 21.2" Table, 40.19" x 21.28" x 20.1" Travels, 8,000 RPM, 40 Taper, 20 HP, 30 ATC, Rigid Tapping, Remote Jog Handle, More..
Doosan-MV-4020_ID-161462008DoosanMV-4020Fanuc 21iMBMACHINING CENTERS, VERTICAL, CNC 
Doosan-MV-4020L_ID-165622007DoosanMV-4020LFanuc OiMACHINING CENTERS, VERTICAL, CNC 

We Sell Used Mazak, Mori Seiki, Okuma, Kitamura, Toyoda, Fadal, Haas, Cincinnati, Starr Swiss, Citizen Swiss, Nakamura, Daewoo, Doosan, Makino, Matsuura, DMG and other machine tools; these Names or Marks are used solely to identify the make and model of used CNC machine tool and does not imply or indicate any affiliation or relation with manufacturers or distributors of said Name(s) or Mark(s).